SPEEDY 2000 MOISTURE TESTERS
ASTM D 4944; AASHTO T 217

The Speedy is widely accepted for rapid, accurate, and reliable moisture tests on all kinds of materialsâ € “ sand, ....

U.S STANDARD TESTING SIEVES
ASTM E11

All sieves are made with brass woven wire and frame and meet international specification.

Use for determining grain size distribution....

Mortar Penetration Aparatus are use to determine times of setting of concrete mixes by measuring the penetration resistance of mortar sieved from fresh mix.
Both units include....

Thin wall diamond bits with bronze welded sectors suitable either for concrete or asphalt. Fixed standard coupling assuring the best alignment, fast and easy fitting and....

Digital Compression Testing Machine 3000 kN capacity.
- Power : 230V, 50Hz, 1Ph.
- For concrete cylinder up to 160x320 mm and cube up to 200 mm.
- Platens dia 300 mm
-....

These apparatus have been designed to determine the content of air in Cement Mortar, Cement Paste and Lime Mortar

Model C196
Standards : EN 12350-7 / DIN 1048
ASTM C231 type B

It consist of an aluminum vessel with build in hand operated pressure pump, connected to the measuring gauge....

Testing Standard : ASTM C 78
100 kN capacity Hydraulic Concrete Beam Testing Machine use for determining the flexural strength of concrete beam by using simple beam with third....

Model : C189
Standard : NF P18-452

The concrete workability meter ( also know as plastometer) is designed to test concrete for hydraulic workability.

It is suitable for....

Use to measure crack width in concrete structures, by operating via an adjustable light source.
High definition unit, provided by power batteries, carrying case.
The eye piece....

Standard : ASTM C1362
To determine the degree of compacting and the workability of fresh concrete.
Use for in-situ measurements or inside test moulds.
Test results can be....

OHAUS Heavy Duty Solution Balance 20 kg capactity x 1 g sensitivity.
Complete with set of weights. sliding weight for tare up to 2270 g, holding plate 280 mm diameter.

Model : C270

Poker Vibrator Heavy Duty, portable, electric.

Tip dimension : 25 mm dia, by 290 mm long.
Flexible shaft : 2 metres long
Frequency : 12000 vibr/ minute
....

Standards : ASTM C29, C139 / AASHTO T19

Made from heavy steel sheet, they are uses to determine the weight per cubic metre of freshly mixed and compacted concrete, and as per....

Standards : ASTM C617
Vertical Cylinder Capping is equipment for forming caps on ends of 15 cm diameter concrete cylinder to proving uniform loading surface compression test.

This electronic tester measures and visualized directly on the display the moisture percentage and temperature of sand and fine aggregates up to max dia of 10 mm by simply....

Product ID: HI520
Concrete Moisture Meter - Instant, handheld, portable

Instant, non-destructive moisture testing of concrete, lightweight concrete, mortar and more. Simply....

Ideal for the internal compaction of concrete specimens and a good alternative to the traditional tamping bar especially when there are large numbers of specimens to be compacted.....

A pocket sized Non-Destructive meter designed to measure the moisture content in Concrete Flooring prior to the application of floor coverings. Versatile, accurate and easy to use....

With the HI-300, you can easily find the moisture content and single unit water volume
on-site by simply placing the weight-screened mortar into the sample tray and pressing
the....